Categorie / Sottocat.

Catalogo

Controller (HBA) / NVMe / AOC-SLG4-2H8M2-O

GALLERY

Clicca sull'immagine per ingrandire la gallery

SCHEDA PRODOTTO

Cod./Produtt.: CTL6806/AOC-SLG4-2H8M2-O
Produttore: SUPERMICRO
Descrizione: HBA PCIe x8 Gen-4 Add-On Card for up to two M.2 NVMe/SATA SSDs - RAID 0,1

SPECIFICHE TECNICHE


Add-on Card

Supermicro Low Profile 2x PCIe Gen 4 Hybrid NVMe/SATA M.2 RAID Boot Storage Adapter The Supermicro MegaRAID Low Profile AOC-SLG4-2H8M2 is a PCIe Gen 4.0 x8 M.2 SSD carrier card that enables the user to add up to two NVMe or SATA M.2 SSDs. M.2 solid state technology is an optimized, high-performance, scalable storage solution, effectively streamlined for enterprise and client systems that leverage the cutting-edge power of PCI Express 4.0 technology. AOC-SLG4-2H8M2 supports adjustable stand-offs in 22110, 2280, & 2242 M.2 SSD form factors with RAID 0 and RAID 1.

This product is only available through Supermicro. Compatible with Supermicro motherboards only.
Product Note: Supermicro AOC-SLG4-2H8M2, as a Gen 4 NVMe M.2 adapter, is carrying its new accessory - a uniquely designed heatsink - when being compared to the previous gen product - AOC-SLG3-2H8M2 - for Gen 3 NVMe M.2 and without heatsink. While adopting 22x110mm M.2s, it is suggested to ONLY select the M.2s qualified by referencing each system's AVL with AOC-SLG4-2H8M2. AOC-SLG4-2H8M2 carries SAS 3808 chipset, a 12Gb/s SAS/SATA controller. Thus NVMe M.2s populated on the carrier are exposed with SAS addresses and recognized as SATA devices or SAS drives by OS or BIOS. When a system with IOMMU or VT-d enabled is configured with an iMR controller-based storage add-on-card/module, please make sure the system BIOS supports either IVMD (AMD-based system) or RMRR (Intel-based system) for iMR controller to work seamlessly with host memory. Also see statements from Broadcom in its user guide, section “HII Configuration Utility”.


Compliance

RoHS	RoHS Compliant 6/6, Pb Free


Key Features

Broadcom 3808 SAS controller, dual M-Key sockets, 16 Gb/s per port, with RAID 0 and 1. Broadcom SAS3808 I/O RAID Controller x8 PCIe Gen4 Host interface Dual M-Key sockets (for 2x M.2 SSD) Adjustable stand-offs supporting 22110, 2280, & 2242 M.2 SSD form factors Support NVMe Gen 4 (16 Gbps) M.2 modules and SATA Gen 3 (6 Gbps) M.2 modules Supports RAID 0 and RAID 1 Support MCTP over PCIe/ I2C Support BMC-enabled management Support secure erase Support hardware secure boot Support on-board LEDs for SSD Activity and Status UEFI Configuration utility OS Support: Windows, Linux, and VMWare Power Consumption: 7W (AOC only, maximum; M.2 power consumption excluded) Thermal operating range: System dependent (55°C or higher w/ enough airflow)


Dimensions

L x H	6.6" x 2.71"
Weight	0.25 lbs


Validated Platforms

Servers	[Validated Platform List]

Downloads

User's Guide	[ Download ]
Driver	[ Download ]
Firmware	[ Download ]


Tested Drives

Tested M.2	[ View List ]

Cookie Necessari (Obbligatori)

Cookie Analitici

Cookie di Profilazione

Cookie Necessari
(Obbligatori)