Product SKUs

MBD-X11SDW-14CN-TP13F+

Physical Stats
Form Factor	Proprietary WIO
Dimension	8" x 10" (20.32cm x 25.4cm)

Processor
CPU	Intel® Xeon® Processor D-2177NT Single Socket FCBGA-2518 supported, CPU TDP supports Up to 105W TDP
Core	Up to 14 cores, 28 threads / 19MB Cache

System Memory
Memory Capacity	4 DIMM slots Up to 512GB ECC LRDIMM, DDR4-2400MHz; Up to 256GB ECC RDIMM, DDR4-2400MHz
Memory Type	2666/2400/2133 MT/s ECC DDR4 LRDIMM, RDIMM
DIMM Sizes	8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors

On-Board Devices
Chipset	System on Chip
SATA	SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI	ASPEED AST2500 Support for Intelligent Platform Management Interface v.2.0
Graphics	1 ASPEED AST2500 BMC port(s) Header Only
Network Controllers	Quad LAN with 1GbE with Intel® I350-AM4 Quad LAN with Intel® Ethernet Controller I350-AM4, Total 13 LAN ports Quad LAN with 10G SFP+ LAN via SoC Single LAN with 1GbE with Intel® I210 Single LAN with Realtek RTL8201N PHY (dedicated IPMI)

Input / Output
SATA	4 SATA3 port(s)
LAN	1 RJ45 Dedicated IPMI LAN port 9 RJ45 Gigabit Ethernet LAN ports 4 10G SFP+ LAN ports
USB	4 USB 2.0 port(s) (4 via header) 2 USB 3.1 Gen1 port(s) (2 rear type A)
Video Output	1 VGA port(s)
Serial Port	2 COM Port(s) (1 header; 1 rear)
DOM	1 SuperDOM (Disk on Module) port with build power
TPM	1 TPM Header & Chip both

Expansion Slots
PCIe	1 PCIe 3.0 x32 Left Riser Slot
M.2	M.2 Interface: 1 SATA/PCIe 3.0 x4; 1 PCIe 3.0 x1; 1 SATA/PCIe 3.0 x2/USB 3.0 Form Factor: 2280/22110, 2230, 2242 Key: M-Key, E-Key, B-Key

System BIOS
BIOS Type	256MB UEFI
BIOS Features	ACPI 6.1 SMBIOS 3.1 UEFI 2.7 PCI FW 3.2

Management
Software	SuperDoctor® 5, NMI, SUM, KVM with dedicated LAN, Intel® Node Manager, IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software	IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations	ACPI Power Management, +12V DC Power Input, CPU thermal trip support for processor protection

PC Health Monitoring
Voltage	System temperature, System level control, Supports system management utility, Memory, HT, Chassis intrusion header, 6 -fan status, +5V standby, +5V, +3.3V, +12V, +1.5V, Memory Voltages
LED	UID/Remote UID CPU / System Overheat LED
Temperature	Monitoring for CPU and chassis environment
FAN	6x 4-pin fan headers (up to 6 fans) Thermal control tachometer fan connectors, System level control, PWM fan speed control, Low noise fan speed control, Fan speed control, Dual Cooling Zone, 6 fans with tachometer status monitoring, Status monitoring for speed control, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication
Other Features	WOL, UID, System level control, RoHS, Node Manager Support, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, 8-pin 12v DC power connector, 12V DC or ATX Power Source, SDDC

Operating Environment
Operating Temperature Range	0°C - 60°C (32°F - 140°F)
Non-Operating Temperature Range	-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range	8% - 90% (non-condensing)
Non Operating Relative Humidity Range	5% - 95% (non-condensing)