Product SKUs

MBD-X11SDW-8C-TP13F

Physical Stats
Form Factor	Proprietary WIO
Dimension	8" x 9.6" (20.32cm x 24.38cm)

Processor
CPU	Intel® Xeon® Processor D-2146NT Single Socket FCBGA-2518 supported, CPU TDP supports Up to 80W TDP
Core	Up to 8 cores, 16 threads

System Memory
Memory Capacity	4 DIMM slots Up to 512GB ECC LRDIMM, DDR4-2133MHz; Up to 256GB ECC RDIMM, DDR4-2133MHz
Memory Type	2666/2400/2133 MT/s ECC DDR4 LRDIMM, RDIMM (Operating speed up to 2133MHz)
DIMM Sizes	8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	System on Chip
SATA	SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI	ASPEED AST2500
Graphics	1 ASPEED AST2500 BMC port(s) Header Only
Network Controllers	Quad LAN with 1GbE with Intel® I350-AM4 Dual LAN with 10Gbase-T Dual LAN with 10G SFP+ LAN via SoC Quad LAN with Intel® Ethernet Controller I350-AM4, Total 13 LAN ports Single LAN with 1GbE with Intel® I210 Single LAN with Realtek RTL8201N PHY (dedicated IPMI)

Input / Output
SATA	4 SATA3 port(s)
LAN	1 RJ45 Dedicated IPMI LAN port 2 10G SFP+ LAN ports 2 RJ45 10GBase-T ports 9 RJ45 Gigabit Ethernet LAN ports
USB	4 USB 2.0 port(s) (4 via header) 2 USB 3.1 Gen1 port(s) (2 rear type A)
Video Output	1 VGA port(s)
Serial Port	2 COM Port(s) (1 header; 1 rear)
DOM	1 SuperDOM (Disk on Module) port with build power
TPM	1 TPM Header & Chip both

Expansion Slots
PCIe	1 PCIe 3.0 x32 Left Riser Slot
M.2	M.2 Interface: 1 SATA/PCIe 3.0 x4; 1 PCIe 3.0 x1; 1 SATA/PCIe 3.0 x2/USB 3.0 Form Factor: 2280/22110, 2230, 2242/3042 Key: M-Key, E-Key, B-Key

System BIOS
BIOS Type	256MB UEFI
BIOS Features	ACPI 6.1 SMBIOS 3.1 UEFI 2.7 PCI FW 3.2

Management
Software	SuperDoctor® 5, NMI, SUM, KVM with dedicated LAN, Intel® Node Manager, IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software	IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations	ACPI Power Management, +12V DC Power Input, CPU thermal trip support for processor protection

PC Health Monitoring
Voltage	System temperature, System level control, Supports system management utility, Monitors CPU voltages, Chassis intrusion header, 6 -fan status, 5 -fan status, +5V standby, +5V, +3.3V, +12V, +1.5V, Memory Voltages, 5 (4-pin)
LED	UID/Remote UID CPU / System Overheat LED
Temperature	Monitoring for CPU and chassis environment
FAN	6x 4-pin fan headers (up to 6 fans) Thermal control tachometer fan connectors, System level control, PWM fan speed control, Fan speed control, Dual Cooling Zone, 6 fans with tachometer status monitoring, Overheat LED indication
Other Features	WOL, UID, System level control, RoHS, Node Manager Support, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, 8-pin 12v DC power connector, 12V DC or ATX Power Source, SDDC, Intel® QuickAssist Technology

Operating Environment
Operating Temperature Range	0°C - 60°C (32°F - 140°F)
Non-Operating Temperature Range	-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range	8% - 90% (non-condensing)
Non Operating Relative Humidity Range	5% - 95% (non-condensing)