Product SKUs

MBD-X12STN-E

Physical Stats
Form Factor	3.5" SBC
Dimension	5.7" x 4" (14.6cm x 10.16cm)

Processor
CPU	11th Generation Intel® Core™ i5-1145GRE Processor Single Socket FCBGA-1449 supported, CPU TDP supports Up to 28W TDP
Core	Up to 4 cores, 8 threads / 8MB Cache

System Memory
Memory Capacity	2 DIMM slots Up to 64GB Unbuffered non-ECC SODIMM, DDR4-3200MHz
Memory Type	3200 MT/s non-ECC DDR4 Unbuffered ered 260pin SODIMM
DIMM Sizes	4GB, 8GB, 16GB, 32GB
Memory Voltage	1.2V

On-Board Devices
Chipset	System on Chip
Audio	1x ALC 888S HD Audio port(s)ALC 888S HD Audio
Graphics	1 Intel® Iris® Xe Graphics port(s) Dual channel 48-bit LVDS(max. resolution up to 1920x1200@60Hz), HDMI 2.0b (max. resolution up to 4096x2160@60Hz), HDMI 1.4b (max. resolution up to 4096x2160@30Hz), DP (Alt mode, max. resolution up to 4096x2304@60Hz)
Network Controllers	Dual LAN with Intel® Ethernet Controller I225-IT, 2.5G, TSN, industrial grade.

Input / Output
SATA	1 SATA3 (6Gbps) port(s)
LAN	2 RJ45 2.5 Gigabit Ethernet LAN port
USB	4 USB 2.0 port(s) (4 via header) 4 USB 3.2 Gen2 port(s) (3 rear type A; 1 rear type C)
Video Output	2 HDMI port(s), 1 48-bit LVDS port(s), 1 DP (Alt mode) port(s)
Serial Port	4 COM Port(s) (4 header), (2 x RS232, 2 RS232/422/485, RS-485 supports Auto flow control)
TPM	1 TPM Chip
Others	1 HD Audio header Mic-in/Headphone-out (Audio only support at 0~60C) 1 speaker out header with 3W amplifier 1 8-bit GPIO header 1 SMBus header 1 System Fan

Expansion Slots
PCIe	N/A
M.2	Key: B-Key, M-Key, E-Key M.2 2242/3042/2280 B-Key (USB3.0/2.0, SATA Gen3/PCIe Gen3 x1) with nano SIM holder M.2 2230 E-Key (CNVi/PCIe 3.0 x1/USB2) M.2 2242/2280 M-Key (PCIe 4.0 x4), NVMe support

System BIOS
BIOS Type	AMI UEFI
BIOS Features	ACPI 6.2 SMBIOS 3.0 or later UEFI 2.7 PCI FW 3.0

Management
Software	SuperDoctor® 5, AMT, vPro, Watchdog
System Management Software	SuperDoctor 5
Power Configurations	ACPI Power Management, CPU thermal trip support for processor protection, +12-24V DC Power Input, Control of power-on for recovery from AC power loss, Force Power On by Jumper

PC Health Monitoring
Voltage	VBAT, System temperature, System level control, Monitors CPU voltages, 3.3V standby, 1.2V (VDIMM), +5V, +3.3V, +12V
LED	Standby alert LED
Temperature	CPU thermal trip support
FAN	1x 4-pin fan header (up to 1 fan) Thermal control tachometer fan connectors System level control PWM fan speed control Low noise fan speed control Fan speed control
Other Features	WOL, System level control, RoHS, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, ACPI power management, 8-pin 12-24V DC Power Connector

Operating Environment
Operating Temperature Range	-40°C - 60°C (0°F - 140°F)
Non-Operating Temperature Range	-40°C - 85°C (-40°F - 185°F)
Operating Relative Humidity Range	8% - 90% (non-condensing)
Non Operating Relative Humidity Range	10% - 95% (non-condensing)