Catalogo
SCHEDA PRODOTTO
Cod./Produtt.: SYS-1029U-TN12RV/SYS-1029U-TN12RV
Produttore: SUPERMICRO
Descrizione: 1U DP Xeon LGA3647 - 12x2,5" NVME/SATA3 - 24xDDR4 ECC-R - 2*PCIe x16 (1 internal for storage controller), 1*PCIe x8 - 2x10GbE RJ45Flexible networking options, up to 25GbE via Ultra Riser car - IPMI 2.0 + KVM with LAN - Optional 2*NVME M.2
SPECIFICHE TECNICHE
Product SKUs
SYS-1029U-TN12RV SuperServer 1029U-TN12RV ( Black )
Motherboard
Motherboard Super X11DPU-V
Processor/Cache
CPU Dual Socket P (LGA 3647)
  2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s
  Support CPU TDP 70-205W
Cores Up to 28 Cores
Note ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.
System Memory
Memory Capacity 24 DIMM slots
  Up to 6TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM
  Supports Intel® Optane™ DCPMM ††
Memory Type 2666 ECC DDR4 NVDIMM
  2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.
On-Board Devices
Chipset Intel® C621 chipset
SATA SATA3 (6Gbps)
Network Connectivity Networking options provided via Ultra Riser card
IPMI Support for Intelligent Platform Management Interface v.2.0
  IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics ASPEED AST2500 BMC
Input / Output
NVMe 6 NVMe/SATA ports (NVMe from CPU 1)
  6 NVMe/SATA ports (NVMe from CPU 2)
LAN 1 RJ45 Dedicated IPMI LAN port
  Networking options provided via Ultra Riser card
USB 2 USB 3.0 ports (rear)
  1 USB 3.0 (front)
Video 1 VGA port
Serial Port 1 Serial header
DOM 2 Super DOM (Disk on Module) ports
System BIOS
BIOS Type AMI 32Mb SPI Flash ROM
Management
Software NMI
  KVM with dedicated LAN
  Redfish API
  SuperDoctor® 5
  Intel® Node Manager
  IPMI 2.0
  SSM , SPM , SUM
Power Configurations ACPI Power Management
PC Health Monitoring
CPU 4+1 Phase-switching voltage regulator
  Monitors for CPU Cores, Chipset Voltages, Memory.
FAN Status monitor for speed control
  Pulse Width Modulated (PWM) fan connectors
  Fans with tachometer monitoring
Temperature Monitoring for CPU and chassis environment
  Thermal Control for fan connectors
Chassis
Form Factor 1U Rackmount
Model CSE-119UHTS-R1K22HP-T
Dimensions and Weight
Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 29.1" (739mm)
Gross Weight 48 lbs (21.8 kg)
Available Color Black
Front Panel
Buttons Power On/Off button
  System UID button
LEDs Power LED
  Network activity LEDs
  Hard drive activity LED
  UID LED
Expansion Slots
PCI-Express 1 PCI-E 3.0 x16 (FH, 10.5"L)
  1 PCI-E 3.0 x8 (LP)
  1 Internal PCI-E 3.0
Drive Bays / Storage
Hot-swap 12 Hot-swap 2.5" NVMe/SATA drive bays
  Optional SAS support via SAS storage controller
M.2 2 M.2 PCI-E 3.0 x4 M-Key NVMe via optional add-on card AOC-SLG3-2M2 (2260/2280/22110)
System Cooling
Fans 8 Heavy duty fans with optimal fan speed control
Air Shroud 1 Air Shroud
Power Supply
Power Supply 1200W Redundant Hot-swap Power Supplies with PMBus
Total Output Power 800W: 100 – 127Vac
  1200W: 200 – 240Vac
  1200W: 200 -240Vdc (for CCC only)
Dimension (W x H x L) 73.5 x 40 x 203 mm
Input 100-127Vac / 9.8 - 7A / 50-60Hz
  200-240Vac / 7.5 - 6A / 50-60Hz
  200-240Vdc / 7.5 - 6A (for CCC only)
+12V Max: 66.7A / Min: 0A (100-127Vac)
  Max: 100A / Min: 0A (200-240Vac)
  Max: 100A / Min: 0A (200-240Vdc)
+12Vsb Max: 2.1A / Min: 0A
Output Type 25 Pairs Gold Finger Connector
Certification Titanium Level
Operating Environment
RoHS RoHS Compliant
Environmental Spec. Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
  Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  Operating Relative Humidity: 8% to 90% (non-condensing)
  Non-operating Relative Humidity: 5% to 95% (non-condensing)