Catalogo
SCHEDA PRODOTTO
Cod./Produtt.: MSH6809/MBD-H11DSi-NT-O
Produttore: SUPERMICRO
Descrizione: SRW - DP - AMD EPYC 7000 (SP3 Socket), 16xDDR4 2666MHz up to 2TB ECC REG, PCIe: 2(x16 3.0) - 3(x8 3.0), 1 M2 SATA, LAN: 2 x 10GbE RJ45 (intel i550), 10xSATA3 Raid 0, 1, 5, 10, 2 x NVMe (PCIe x4 3.0), VGA, IPMI2.0 su LAN dedicata, KVM function, E-AT
SPECIFICHE TECNICHE
Main Specifications
Device Type Motherboard
Dimensions (WxDxH) 12" x 13.05" (30.5cm x 33.1cm)
Form Factor E-ATX
Processor
Compatible Processors Dual AMD EPYC 7000-series Processors
Processor Sockets Socket SP3
System Memory
DIMM Sizes 8GB, 16GB, 32GB, 64GB, 128GB
Error Detection Corrects single-bit errors
  Detects double-bit errors (using ECC memory)
Memory Capacity 16 DIMM sockets
  Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
  8-channel memory bus
  For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
Memory Voltage 1.2V
On-Board Devices
Chipset System on Chip
IPMI Support for Intelligent Platform Management Interface v.2.0
  IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  ASPEED AST2500 BMC
Network Controllers Intel® X550 10G Base-T Ethernet Controller
  1 Realtek RTL8211E PHY (dedicated IPMI)
SATA SATA3 (6 Gbps)
VGA ASPEED AST2500 BMC
Input / Output
LAN 2 RJ45 10GBase-T ports
  1 RJ45 Dedicated IPMI LAN port
NVMe 2 Internal NVMe Ports (PCI-E 3.0 x4)
Others 1 COM port (rear)
  2 SATA DOM power connectors
  1 TPM 2.0 header
SATA 10 SATA3 (6 Gbps) ports
USB 2 USB 3.0 ports (rear)
  4 USB 2.0 ports (2 rear + 2 via header)
VGA 1 VGA port
Expansion / Connectivity
Expansion Slots Total (Free) PCI-Express:3 PCI-E 3.0 x8
  PCI-Express: 2 PCI-E 3.0 x16
  M.2: Interface: PCI-E 3.0 x2
  M.2: Form factor: 22110
  M.2: Support SATA devices
Chassis Optimized for
Tower / 4U Rackmount CSE-745BAC-R1K28B2
System BIOS
BIOS Features Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1
BIOS Type AMI 128Mb SPI Flash EEPROM
Management
Power Configurations ACPI Power Management
  Power-on mode control for AC power loss recovery
Software Super Doctor 5, Watch Dog, NMI, SPM, SUM, IPMI 2.0, KVM with dedicated LAN
PC Health Monitoring
CPU Monitors CPU Core Voltages, +1.1V, +1.5V, +1.8V, +12V, +5V, +5V standby
  CPU switching voltage regulator
FAN Up to 8-fan status tachometer monitoring
  Up to eight 4-pin fan headers
  Dual Cooling Zone
  Status monitor for speed control
  Pulse Width Modulated (PWM) fan connectors
LED CPU / System Overheat LED
Other Features Chassis Intrusion Detection
  Chassis Intrusion Header
  UID
Temperature Monitoring for CPU and chassis environment
  CPU Thermal Trip Support
  Thermal control for 8x Fan connectors
  I2C Temperature Sensing Logic
Environmental Standards
Operating Temperature Operating Temperature:10°C to 35°C (50°F to 95°F)
  Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)
  Operating Relative Humidity:8% to 90% (non-condensing)
  Non-operating Relative Humidity:5% to 95% (non-condensing)
Parts List
I/O Cables 2x CBL-0044L, 2x CBL-0097L-03
I/O Shield 1x MCP-260-00042-0N
Motherboard 1x MBD-H11DSI-NT -O