Catalogo
SCHEDA PRODOTTO
Cod./Produtt.: MSH6810/MBD-H11SSL-C-O
Produttore: SUPERMICRO
Descrizione: SRW - UP - AMD EPYC 7000 (SP3 Socket), 8xDDR4 3200MHz up to 2TB ECC REG, PCIe: 3(x16 3.0) - 3(x8 3.0), 1 M2 SATA, LAN: 2 x GbE RJ45 (intel i210), 8xSATA3, 8 x SAS3 (Broadcom 3008), VGA, IPMI2.0 su LAN dedicata, KVM function, ATX 12"x9,6"
SPECIFICHE TECNICHE
Main Specifications
Device Type Motherboard
Dimensions (WxDxH) 12" x 9.6" (30.5cm x 24.4cm)
Form Factor ATX
Processor
Compatible Processors Single AMD EPYC 7000-series Processor
Processor Sockets Socket SP3
System Memory
DIMM Sizes 8GB, 16GB, 32GB, 64GB, 128GB
Error Detection Corrects single-bit errors
  Detects double-bit errors (using ECC memory)
Memory Capacity 8 DIMM slots
  Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs
  8-channel memory bus
Memory Type DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
Memory Voltage 1.2V
On-Board Devices
Chipset System on Chip
IPMI Support for Intelligent Platform Management Interface v.2.0
  IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  ASPEED AST2500 BMC
Network Controllers 2 1GbE LAN via Intel I210
  1 Realtek RTL8211E PHY (dedicated IPMI)
SAS Broadcom 3008 SAS3 (12 Gbps) controller - RAID 0, 1, 10
SATA SATA3 (6 Gbps)
VGA ASPEED AST2500 BMC
Input / Output
DOM 2 SATA DOM power connector
LAN 2 RJ45 Gigabit Ethernet LAN ports
  1 RJ45 Dedicated IPMI LAN port
Others 1 COM port (rear)
SAS 8 SAS3 (12 Gbps) ports
SATA 8 SATA3 (6 Gbps) ports
TPM 1 TPM 1.2 header
USB 5 USB 3.0 ports (2 rear, + 2 via header + 1 Type A)
  4 USB 2.0 ports (2 rear + 2 via header)
VGA 1 VGA port
Expansion / Connectivity
Expansion Slots Total (Free) PCI-Express: 3 PCI-E 3.0 x8
  PCI-Express: 3 PCI-E 3.0 x16
  M.2: Interface: PCI-E 3.0 x4
  M.2: Form factor: 2260, 2280, 22110
  M.2: Support SATA devices
System BIOS
BIOS Features Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1
BIOS Type AMI 128Mb SPI Flash EEPROM
Management
Power Configurations ACPI Power Management
  Power-on mode control for AC power loss recovery
Software Super Doctor 5, Watch Dog, NMI, SUM, IPMI 2.0, KVM with dedicated LAN
PC Health Monitoring
CPU Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby
  CPU switching voltage regulator
  Supports system management utility
  VBAT
FAN Up to 7-fan status tachometer monitoring
  Up to 7 4-pin fan headers
  Dual Cooling Zone
  Status monitor for speed control
  Pulse Width Modulated (PWM) fan connectors
LED CPU / System Overheat LED
Other Features Chassis Intrusion Detection
  Chassis Intrusion Header
  UID
Temperature Monitoring for CPU and chassis environment
  CPU Thermal Trip Support
  Thermal control for 7x Fan connectors
  I²C Temperature Sensing Logic
Environmental Standards
Non-operating Relative Humidity 5% to 95% (non-condensing)
Non-operating Temperature -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity 8% to 90% (non-condensing)
Operating Temperature 10°C to 35°C (50°F to 95°F)