Catalogo
SCHEDA PRODOTTO
Cod./Produtt.: MBD-M11SDV-8C-LN4F-O/MBD-M11SDV-8C-LN4F-O
Produttore: SUPERMICRO
Descrizione: Mini-ITX w/ AMD EPYC 3251 SoC,8C/16T, TDP 55W,1.9-3.1GHz, 4*DDR4 UP TO 512Gb, PCIe: 1(x16 3.0) , 1*M.2 NVMe
SPECIFICHE TECNICHE
Product SKUs
MBD-M11SDV-8C-LN4F
  • M11SDV-8C-LN4F
Physical Stats
Form Factor
  • Mini-ITX
Dimensions
  • 6.7" x 6.7" (17cm x 17cm)
Processor/Cache
CPU
  • Single AMD EPYC™ 3251 SoC Processor
Cores
  • 8 Core/16 Thread
Chipset
  • System on Chip
System Memory
Memory Capacity
  • 4 DIMM slots
  • Supports up to 512GB Registered ECC DDR4 2666MHz SDRAM in 4 DIMMs
  • 2-channel memory bus
Memory Type
  • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
SATA
  • SATA3 (6 Gbps)
Network Controllers
  • 4x 1GbE with Intel® I350-AM4
  • 1 Realtek RTL8211E PHY (dedicated IPMI)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
VGA
  • ASPEED AST2500 BMC
Input / Output
SATA
  • 4 SATA3 (6 Gbps) ports
LAN
  • 4 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports
  • 6 USB 2.0 ports
VGA
  • 1 VGA port
Others
  • 1 COM port header
  • 1 TPM 2.0 header
Expansion Slots
PCI-Express
  • 1 PCI-E 3.0 x16 slot
M.2
  • Interface: 1 PCI-E 3.0 x4
  • Form factor: 2280
  • Key: M-key
Chassis ( Optimized for M11SDV-8C-LN4F )
1U
Server(s) ( with M11SDV-8C-LN4F )
Model(s)
System BIOS
BIOS Type
  • AMI 128Mb Flash EEPROM
Management
Software
Power Configurations
  • ACPI Power Management
  • Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +12V
  • CPU switching voltage regulator
  • Supports system management utility
  • VBAT
FAN
  • Up to 3 fan status tachometer monitoring
  • Up to 3 4-pin fan headers
  • Dual Cooling Zone
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 6x Fan connectors
  • I²C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
Other Features
  • UID
Operating Environment / Compliance
Environmental Specifications
  • Operating Temperature:
    0°C to 60°C (32°F to 140°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)