Catalogo
SCHEDA PRODOTTO
Cod./Produtt.: BBP6842/SYS-6028TP-HC0TR
Produttore: SUPERMICRO
Descrizione: 2U Twin Pro 2 DP - E5-26xx V3/V4 LGA2011, QUAD SET OF: 3x3,5" SAS HSwap, 16xDDR4 ECC-R up to 1TB , LSI 3008 SAS3, 2x10GbE (x540) RJ45, IPMI 2.0 + KVM with LAN, Exp. Slot: 1xPCIe LP, 1x"0SLOT", Red. 2000W Platinum Lev. HE
SPECIFICHE TECNICHE

2U TwinPro™ -  6028TP-HC0TR




Integrated Board
Super X10DRT-PT

 
Key Features
 
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
 
1. Dual socket R (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v4/ v3 family; QPI up to 9.6GT/s
 
2. Up to 2TB ECC 3DS LRDIMM , up to
    DDR4- 2400MHz ; 16x DIMM slots
 
3. 1x PCI-E 3.0 x16 Low-profile slot;
    1x "0 slot" (x16)
 
4. Intel® X540 Dual port 10GBase-T
 
5. Integrated IPMI 2.0 with KVM and
    Dedicated LAN
 
6. 3x 3.5" Hot-swap SAS/SATA HDD
    Bays
 
7. Broadcom 3008 SAS3 controller (8 ports);
    RAID 0, 1, 10
 
8. Mini-mSATA (half size) support
 
9. 2000W Redundant Power Supplies
    Titanium Level (96%)
 
 

Product SKUs
SYS-6028TP-HC0TR
  • SuperServer 6028TP-HC0TR (Black)
 
Motherboard

Super X10DRT-PT
 
Processor/Cache (per Node)
CPU
  • Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 
System Memory (per Node)
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SAS
  • Broadcom 3008 SAS3 (12Gbps) controller;
       RAID 0, 1, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
 
Input / Output (per Node)
SAS
  • 3x SAS3 (12Gbps) ports
LAN
  • 2x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports total (2x rear)
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 Header (internal)
Others
  • 1x SATADOM support on the motherboard
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-827HQ+-R2K04B
 
Dimensions and Weight
Width
  • 17.25" (438mm)
Height
  • 3.47" (88mm)
Depth
  • 30.5" (774mm)
Weight
  • Gross Weight: 90 lbs (40.9kg)
  • Net Weight: 72 lbs (32.7 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • Universal Information (UID) LED
 
Expansion Slots (per Node)
PCI-Express
  • 1x PCI-E 3.0 x16 Low-profile slot
0 Slot
  • 1x "0 slot" (x16)
  • Compatible Listing


  • (Both CPUs need to be installed for full access to PCI-E slots and 0 slot.)
 
Drive Bays (per Node)
Hot-swap
  • 3x 3.5" Hot-swap SAS/SATA HDD trays
 
System Cooling
Fans
  • 4x 8cm heavy duty PWM fans with optimal fan speed control
 
Power Supply (76mm Width)
2000W Redundant Power Supplies with PMBus
Total Output Power
  • 1000W/2000W
Dimension
(W x H x L)
  • 76 x 40.4 x 336 mm
Input
  • 100-127 Vac / 12-9.5 A / 50-60 Hz
  • 200-220 Vac / 10-9.5 A / 50-60 Hz
  • 220-230 Vac / 10-9.8 A / 50-60 Hz
  • 230-240 Vac / 10-9.8 A / 50-60 Hz
  • 200-240 Vac / 11.8-10 A / 50-60 Hz (UL/cUL only)
+12V
  • Max: 83.3A & Min: 0A (100-127 Vac)
  • Max: 150A & Min: 0A (200-220 Vac)
  • Max: 165A & Min: 0A (220-230 Vac)
  • Max: 166.7A & Min: 0A (230-240 Vac)
  • Max: 166.7A & Min: 0A (200-240 Vac)(UL/cUL only)
+5Vsb
  • Max: 1A / Min: 0A
Output Type
  • 27 Pairs Gold Finger Connector
Certification Titanium Level96%  UL/cUL/CB/BSMI/CE/CCC
  Titanium Level
  [ Test Report ]
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
 
Parts List - (Items Included)
 
Part Number
Qty
Description
Motherboard / Chassis MBD-X10DRT-PT
 
CSE-827HQ+-R2K04B
4
 
1
Super X10DRT-PT Motherboard
 
2U Chassis
Backplane BPN-ADP-S3008L-L6IP 4 LSI 3008, SAS 12Gbs (X6 port inside)
Backplane BPN-SAS3-827HQ 1 12-port 2U TwinPro^2 SAS3 CSE-827HQ (3 drives per node) backplane, support up to 12x 3.5-inch SAS3/SATA3 HDD
Label LBL-0108 1 CAUTION LABEL FOR REDUNDANT PWR SYSTEMS
Manual MNL-1663-QRG 1 6028TP-HC0R/HC0TR/HC0FR, QRG
Riser Card RSC-R1UTP-E16R 4 ,RoHS/REACH,PBF
Heatsink / Retention SNK-P0057PS 4 1U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB
Heatsink / Retention SNK-P0047PSM 4 1U Passive Front CPU Heat Sink w/ a Middle Air Channel for X9, X10 2U Twin^2+ and Twin Pro^2 Series Servers
Air Shroud MCP-310-21703-0B
or
MCP-310-21702-0B
4 TwinPro 217HQ+/827HQ+ X10 plastic air shroud
or
TwinPro 217HQ+/827HQ+ X10 mylay air shroud
Power Supply PWS-2K04A-1R
or
PWS-2K02P-1R
2 2000W Redundant Titanium Level Power Supplies
or
2000W Redundant Platinum Level Power Supplies

 
Optional Parts List
  Part Number Qty Description
       
Software SFT-OOB-LIC 4 OOB Management Package (per node license)
Software SFT-DCMS-Single 4 DataCenter Management Package (per node license)