Product SKUs
MBD-M11SDV-8C-LN4F	M11SDV-8C-LN4F

Physical Stats
Form Factor	Mini-ITX
Dimensions	6.7" x 6.7" (17cm x 17cm)

Processor/Cache
CPU	Single AMD EPYC™ 3251 SoC Processor
Cores	8 Core/16 Thread

Chipset

System on Chip

System Memory
Memory Capacity	4 DIMM slots Supports up to 512GB Registered ECC DDR4 2666MHz SDRAM in 4 DIMMs 2-channel memory bus
Memory Type	DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes	8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
SATA	SATA3 (6 Gbps)
Network Controllers	4x 1GbE with Intel® I350-AM4 1 Realtek RTL8211E PHY (dedicated IPMI)
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
VGA	ASPEED AST2500 BMC

Input / Output
SATA	4 SATA3 (6 Gbps) ports
LAN	4 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB	2 USB 3.0 ports 6 USB 2.0 ports
VGA	1 VGA port
Others	1 COM port header 1 TPM 2.0 header

Expansion Slots
PCI-Express	1 PCI-E 3.0 x16 slot
M.2	Interface: 1 PCI-E 3.0 x4 Form factor: 2280 Key: M-key

Chassis ( Optimized for M11SDV-8C-LN4F )
1U	SCE300 SCE301

Server(s) ( with M11SDV-8C-LN4F )
Model(s)	AS -5019D-FTN4 AS -E301-9D-8CN4

System BIOS
BIOS Type	AMI 128Mb Flash EEPROM

Management
Software	Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN
Power Configurations	ACPI Power Management Power-on mode control for AC power loss recovery

PC Health Monitoring
CPU	Monitors CPU Core Voltages, +1.8V, +3.3V, +12V CPU switching voltage regulator Supports system management utility VBAT
FAN	Up to 3 fan status tachometer monitoring Up to 3 4-pin fan headers Dual Cooling Zone Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 6x Fan connectors I²C Temperature Sensing Logic
LED	CPU / System Overheat LED
Other Features	UID

Operating Environment / Compliance
Environmental Specifications	Operating Temperature: 0°C to 60°C (32°F to 140°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)