Main Specifications
Device Type	Motherboard
Form Factor	ATX
Dimensions (WxDxH)	12" x 9.6 ", (30.5cm x 24.4cm)
Processor
Compatible Processors	Single AMD EPYC 7003/7002 Series Processor (7003 Series Processor drop-in support requires BIOS version 2.0 or newer)
Processor Sockets	Socket SP3
Cache/Core	Up to 64 Cores
System Memory
Memory Capacity	8 DIMM slots, Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM, 8-channel memory bus
Memory Type	DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes	8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors, Detects double-bit errors (using ECC memory)
On-Board Devices
SATA/SAS	SATA3 (6 Gbps)
IPMI	Support for Intelligent Platform Management Interface v.2.0, IPMI 2.0 with virtual media over LAN and KVM-over-LAN support, ASPEED AST2500 BMC
Network Controllers	Dual gigabit LAN via Broadcom BCM5720, 1 Realtek RTL8211F PHY (dedicated IPMI)
Graphics	ASPEED AST2500 BMC
USB	6 USB 3.0 ports (4 rear + 2 via header)
Input / Output
SATA/NVMe Hybrid	8 SATA3 (6 Gbps) ports, 8 SATA3 or 2 NVMe via single SlimSAS x8
LAN	2 RJ45 Gigabit Ethernet LAN ports, 1 RJ45 Dedicated IPMI LAN port
VGA	1 VGA port
Others	1 COM port (rear), 2 SATA DOM power connectors, 1 TPM 2.0 header
Expansion / Connectivity
Expansion Slots Total (Free)	5 PCI-E 4.0 x16
	2 PCI-E 4.0 x8
M.2	Form Factor: 2280, 22110
	Key: M-key
	Interface: 2 PCI-E 4.0 x4
System BIOS
BIOS Type	AMI 256Mb SPI Flash EEPROM
BIOS Features	Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1
Management
Software	Super Doctor 5, Watch Dog, NMI, SUM, IPMI 2.0, KVM with dedicated LAN
Power Configurations	ACPI Power Management, Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU	Monitors CPU Core Voltages, +3.3V, +5V, +5V standby, +3.3V standby, CPU switching voltage regulator, Supports system management utility, VBAT
FAN	Up to 7-fan status tachometer monitoring, Up to 7 4-pin fan headers, Dual Cooling Zone, Status monitor for speed control, Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment, CPU Thermal Trip Support, Thermal control for 7x Fan connectors, I²C Temperature Sensing Logic
LED	CPU / System Overheat LED
Other Features	Chassis Intrusion Detection, Chassis Intrusion Header, UID
Environmental
Operating Environment	Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
	Operating Relative Humidity: 8% to 90% (non-condensing)
	Non-operating Relative Humidity: 5% to 95% (non-condensing)
	Operating Temperature: 10°C to 35°C (50°F to 95°F)
Chassis Optimized for
1U Chassis	1U: SC813MFTQC-350CB2, SC813MFTQC-R407CB
2U Chassis	SC213AC-R1K23LPB, SC216BE1C4-R1K23LPB, SC825MBTQC-R802LPB, SC825TQC-R802LPB, SC826BE1C4-R1K23LPB
3U Chassis	SC835TQC-R802B, SC836BE1C-R1K23B
4U Chassis	SC846BE1C-R1K23B
Parts List
I/O Cables	2x CBL-0044L
I/O Shield	1x MCP-260-00042-0N