Product SKUs   AS -1113S-WN10RT A+ Server 1113S-WN10RT   Motherboard   H11SSW-NT   Processor/Chipset   CPU Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required) Socket SP3 Supports CPU TDP 225W / cTDP up to 240W* Cores Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors) Chipset System on Chip (SoC)   System Memory   Memory Capacity 16 DIMM slots Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus Memory Type DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors) DIMM Sizes 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (* Board revision 2.x required + 7002 Processors) Memory Voltage 1.2V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices   IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC Network Controllers Broadcom BCM57416 Controller VGA ASPEED AST2500 BMC   Expansion Slots   PCI Express 2 PCI-E 3.0 x16 (FH/HL) slots 1 PCI-E 3.0 x16 (LP) slot M.2 Interface: PCI-E 3.0 x2 (NVMe based) Form Factor: 2280, 22110 Key: Onboard M-key Number of M.2: Dual   Input / Output   NVMe Up to 10 U.2 NVMe support SATA Optional 4 SATA3 (6 Gbps) support via additional cables LAN 2x 10GbBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port USB 7 USB 3.0 ports (4 rear + 2 front + 1 Type A) VGA 1 VGA port Others 1 COM port 2 SATA DOM power connectors TPM 1.2 header   System BIOS   BIOS Type AMI 128Mb SPI Flash EEPROM BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1

Chassis   Form Factor 1U Model CSE-116TS-R706WBP3   Dimensions and Weight   Height 1.7" (43mm) Width 17.2" (437mm) Depth 23.5" (597mm) Package 7.63" (H) 23.42" (W) 31.45" (D) Weight Net Weight: 20 lbs (9.1 kg) Gross Weight: 33 lbs (15.0 kg)   Front Panel   Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED   Drive Bays   Hot-swap 10 hot-swap 2.5" U.2 NVMe drive bays   Backplane   Hybrid Backplane Supports up to 10x 2.5" NVMe storage devices, 4 of them SAS3/SATA3 compatible   System Cooling   Fans 6 heavy-duty PWM fans with optimal fan speed control Air Shroud 1 Air Shroud   AC/DC240V Input Redundant Power Supply   700W/750W Redundant Power Supplies with PMBus Total Output Power 700W/750W Dimension (W x H x L) 54.5 x 40.25 x 320 mm Input 100 - 140Vac / 8 - 6A / 50-60Hz 200 - 240Vac / 4.5 - 3.8A / 50-60Hz 200 - 240Vdc / 4.5 - 3.8A (CCC Only) +12V Max: 58A / Min: 0.5A (100 - 140Vac) Max: 62A / Min: 0.5A (200 - 240Vac) Max: 62A / Min: 0.5A (200 - 240Vdc) (CB/CCC Only) +5V sb Max: 3A / Min: 0A Output Type Gold Finger Connector Mating with Molex 45984-4343 Certification   Platinum Certified   [ Test Report ]   PC Health Monitoring   CPU Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator FAN Up to 6-fan status tachometer monitoring Up to six 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 6x Fan connectors I²C Temperature Sensing Logic LED CPU / System Overheat LED Other Features Chassis Intrusion Detection Chassis Intrusion Header   Operating Environment / Compliance   RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10°C to 30°C (50°F to 86°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)