6028TP-HTTR




Integrated Board
Super X10DRT-PT
Key Features
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following: 1. Dual socket R (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
2. Up to 1TB ECC LRDIMM, 512GB ECC
    RDIMM, up to 2133MHz; 16x DIMM
    sockets
3. 1x PCI-E 3.0 x16 Low-profile slot;
    1x "0 slot" (x16)
4. Intel® X540 Dual port 10GBase-T 5. Integrated IPMI 2.0 with KVM and
    Dedicated LAN
6. 3x 3.5" Hot-swap SATA HDD Bays 7. 2000W Redundant Power Supplies
    Platinum Level (94%)
Available Colors: Black    

   Drivers & Utilities   BIOS   IPMI   Tested Memory  Tested HDD   Manuals   OS Certification Matrix

Product SKUs
SYS-6028TP-HTTR
  • SuperServer 6028TP-HTTR (Black)
 
Motherboard

Super X10DRT-PT
 
Processor/Cache (per Node)
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 
System Memory (per Node)
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 Express chipset
SATA
  • SATA3 (6Gbps); RAID 0, 1, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
 
Input / Output (per Node)
SATA
  • 6x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports total (2x rear)
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 Header
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-827HQ+-R2K02B
 
Dimensions and Weight
Width
  • 17.25" (438mm)
Height
  • 3.47" (88mm)
Depth
  • 30" (762mm)
Gross Weight
  • 85 lbs (38.6kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • Universal Information (UID) LED
 
Expansion Slots (per Node)
PCI-Express
  • 1x PCI-E 3.0 x16 Low-profile slot
0 Slot
  • 1x "0 slot" (x16)
  • Compatible Listing


  • (Both CPUs need to be installed for full access to PCI-E slots and 0 slot.)
 
Drive Bays (per Node)
Hot-swap
  • 3x 3.5" Hot-swap SATA HDD trays
 
System Cooling
Fans
  • 4x 8cm heavy duty PWM fans with optimal fan speed control
 
Switching Power Supply
2000W Redundant Power Supplies with I2C & PMBus
AC Input
  • 1100W Output @ 100-120V, 12.7-10.5A, 50-60Hz
  • 1400W Output @ 120-140V, 13.5-11.5A, 50-60Hz
  • 1800W Output @ 200-220V, 10.0-9.5A, 50-60Hz
  • 1980W Output @ 220-230V, 10.0-9.8A, 50-60Hz
  • 2000W Output @ 230-240V, 10.0-9.8A, 50-60Hz
5Vsb 4A
I2C Remote Monitoring FRU Data / SMBus / PMBus
Certification Platinum Level Certified95%+
  Platinum Certified
  [ Test Report ]
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
 
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X10DRT-PT
CSE-827HQ+-R2K02B
4
1
Super X10DRT-PT Motherboard
2U Chassis
Backplane BPN-SAS3-827HQ 1 12x 3.5" hard drive backplane; supports 3.5" Twin Pro Chassis; SAS-3 12Gb/s compliance, new Molex 64-pin receptacles, PWM fan control and Power delay control on HDD spin up,RoHS/REACH,PBF
Backplane BPN-ADP-6SATA3P-O-P 4 Backplan adapter card; 6SATA ports,RoHS/REACH,PBF
Riser Card RSC-R1UTP-E16R-O-P 4 ,RoHS/REACH,PBF
Heatsink / Retention SNK-P0057PS 4 1U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB
Heatsink / Retention SNK-P0047PSM 4 1U Passive Front CPU Heat Sink w/ a Middle Air Channel for X9, X10 2U Twin^2+ and Twin Pro^2 Series Servers
Power Supply PWS-2K04A-1R 2 AC-DC 2000W, Titanium Level, Redundancy, 1U, PMBus 1.2, +12V/+5Vsb, 360x76x40mm,HF,RoHS/REACH
Power Supply PWS-2K02P-1R 2 2000W redundant platinum power supply
 
Optional Parts List
  Part Number Qty Description
Software SFT-OOB-LIC 4 OOB Management Package (per node license)
Software SFT-DCMS-Single 4 DataCenter Management Package (per node license)