Product SKUs
MBD-X11SDW-4C-TP13F
Physical Stats
Form Factor
  • Proprietary WIO
Dimension
  • 8" x 10" (20.32cm x 25.4cm)
Processor
CPU
  • Intel® Xeon® Processor D-2123IT
  • Single Socket FCBGA-2518 supported, CPU TDP supports Up to 60W TDP
Core
  • Up to 4 cores, 8 threads / 8MB Cache
System Memory
Memory Capacity
  • 4 DIMM slots
  • Up to 512GB ECC LRDIMM, DDR4-2400MHz; Up to 256GB ECC RDIMM, DDR4-2400MHz
Memory Type
  • 2666/2400/2133 MT/s ECC DDR4 LRDIMM, RDIMM (Operating speed up to 2400MHz)
DIMM Sizes
  • 8GB, 16GB, 32GB, 64GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • System on Chip
SATA
  • SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI
  • ASPEED AST2500
Graphics
  • 1 ASPEED AST2500 BMC port(s)
  • Header Only
Network Controllers
  • Quad LAN with 1GbE with Intel® I350-AM4
  • Dual LAN with 10Gbase-T
  • Single LAN with Realtek RTL8211E PHY (dedicated IPMI)
  • Quad LAN with Intel® Ethernet Controller I350-AM4
  • Dual LAN with 10G SFP+ LAN via SoC, Total 13 LAN ports
  • Single LAN with 1GbE with Intel® I210
Input / Output
SATA
  • 4 SATA3 port(s)
LAN
  • 1 RJ45 Dedicated IPMI LAN port
  • 2 10G SFP+ LAN ports
  • 2 RJ45 10GBase-T ports
  • 9 RJ45 Gigabit Ethernet LAN ports
USB
  • 4 USB 2.0 port(s) (4 via header)
  • 2 USB 3.1 Gen1 port(s) (2 rear type A)
Video Output
  • 1 VGA port(s)
Serial Port
  • 2 COM Port(s) (1 header; 1 rear)
DOM
  • 1 SuperDOM (Disk on Module) port with build power
TPM
  • 1 TPM Header & Chip both
Expansion Slots
PCIe
  • 1 PCIe 3.0 x32 Left Riser Slot
M.2
  • M.2 Interface: 1 SATA/PCIe 3.0 x4; 1 PCIe 3.0 x1; 1 SATA/PCIe 3.0 x2/USB 3.0
  • Form Factor: 2280/22110, 2230, 2242/3042
  • Key: M-Key, E-Key, B-Key
System BIOS
BIOS Type
  • 256MB UEFI
BIOS Features
  • ACPI 6.1
  • SMBIOS 3.1
  • SMBIOS 2.8
  • PCI FW 3.2
  • UEFI 2.7
Management
Software
  • SuperDoctor® 5, NMI, SUM, KVM with dedicated LAN, Intel® Node Manager, IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support, IPMICFG
Power Configurations
  • ACPI Power Management, +12V DC Power Input, CPU thermal trip support for processor protection
PC Health Monitoring
Voltage
  • System temperature, System level control, Supports system management utility, Memory, HT, Chassis intrusion header, 6 -fan status, +5V standby, +5V, +3.3V, +12V, +1.5V, Memory Voltages
LED
  • UID/Remote UID
  • CPU / System Overheat LED
Temperature
  • Thermal Control for 6 Fan Connectors
  • Adaptive Thermal Monitor, PECI 3.0
FAN
  • 6x 4-pin fan headers (up to 6 fans)
  • Thermal control tachometer fan connectors, System level control, PWM fan speed control, Low noise fan speed control, Fan speed control, Dual Cooling Zone, 6 fans with tachometer status monitoring, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication
Other Features
  • WOL, UID, System level control, RoHS, Node Manager Support, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, 8-pin 12v DC power connector, 12V DC or ATX Power Source, SDDC
Operating Environment
Operating Temperature Range
  • 0°C - 60°C (32°F - 140°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non Operating Relative Humidity Range
  • 5% - 95% (non-condensing)