Product SKUs
MBD-X12STN-H
Physical Stats
Form Factor
  • 3.5" SBC
Dimension
  • 5.7" x 4" (14.6cm x 10.16cm)
Processor
CPU
  • 11th Generation Intel® Core™ i7-1185GRE Processor
  • Single Socket FCBGA-1449 supported, CPU TDP supports Up to 28W TDP
Core
  • Up to 4 cores, 8 threads / 12MB Cache
System Memory
Memory Capacity
  • 2 DIMM slots
  • Up to 64GB Unbuffered non-ECC SODIMM, DDR4-3200MHz
Memory Type
  • 3200 MT/s non-ECC DDR4 Unbuffered ered 260pin SODIMM
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.2V
On-Board Devices
Chipset
  • System on Chip
Audio
  • 1x ALC 888S HD Audio port(s)ALC 888S HD Audio
Graphics
  • 1 Intel® Iris® Xe Graphics port(s)
  • Dual channel 48-bit LVDS(max. resolution up to 1920x1200@60Hz),
    HDMI 2.0b (max. resolution up to 4096x2160@60Hz),
    HDMI 1.4b (max. resolution up to 4096x2160@30Hz),
    DP (Alt mode, max. resolution up to 4096x2304@60Hz)
Network Controllers
  • Dual LAN with Intel® Ethernet Controller I225-IT
Input / Output
SATA
  • 1 SATA3 (6Gbps) port(s)
LAN
  • 2 RJ45 2.5 Gigabit Ethernet LAN port
USB
  • 4 USB 2.0 port(s) (4 via header)
  • 4 USB 3.2 Gen2 port(s) (3 rear type A; 1 rear type C)
Video Output
  • 2 HDMI port(s), 1 48-bit LVDS port(s), 1 DP (Alt mode) port(s)
Serial Port
  • 4 COM Port(s) (4 header), (2 x RS232, 2 RS232/422/485, RS-485 supports Auto flow control)
TPM
  • 1 TPM Chip
Others
  • 1 HD Audio header Mic-in/Headphone-out (Audio only support at 0~60C)
  • 1 speaker out header with 3W amplifier
  • 1 8-bit GPIO header
  • 1 SMBus header
  • 1 System Fan
Expansion Slots
PCIe
  • N/A
M.2
  • Key: B-Key, M-Key, E-Key
  • M.2 2242/3042/2280 B-Key (USB3.0/2.0, SATA Gen3/PCIe Gen3 x1) with nano SIM holder
    M.2 2230 E-Key (CNVi/PCIe 3.0 x1/USB2)
    M.2 2242/2280 M-Key (PCIe 4.0 x4), NVMe support
System BIOS
BIOS Type
  • AMI UEFI
BIOS Features
  • ACPI 6.2
  • SMBIOS 3.0 or later
  • UEFI 2.7
  • PCI FW 3.0
Management
Software
  • SuperDoctor® 5, AMT, vPro, Watchdog
System Management Software
  • SuperDoctor 5
Power Configurations
  • ACPI Power Management, CPU thermal trip support for processor protection, +12-24V DC Power Input, Control of power-on for recovery from AC power loss, Force Power On by Jumper
PC Health Monitoring
Voltage
  • VBAT, System temperature, System level control, Monitors CPU voltages, 3.3V standby, 1.2V (VDIMM), +5V, +3.3V, +12V
LED
  • Standby alert LED
Temperature
  • CPU thermal trip support
FAN
  • 1x 4-pin fan header (up to 1 fan)
  • Thermal control tachometer fan connectors
  • System level control
  • PWM fan speed control
  • Low noise fan speed control
  • Fan speed control
Other Features
  • WOL, System level control, RoHS, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, ACPI power management, 8-pin 12-24V DC Power Connector
Operating Environment
Operating Temperature Range
  • -40°C - 60°C (0°F - 140°F)
Non-Operating Temperature Range
  • -40°C - 85°C (-40°F - 185°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non Operating Relative Humidity Range
  • 10% - 95% (non-condensing)