Form Factor |
|
Dimension |
-
9.6" x 9.6" (24.38cm x 24.38cm)
|
CPU |
-
Intel® Xeon® W-1200 Processors, 11th/10th Generation Intel® Core™ i9/Core™ i7/Core™ i5/Core™ i3 Processor
-
Single Socket LGA-1200 (Socket H5) supported, CPU TDP supports Up to 125W TDP
-
A graphic integrated CPU is required to have onboard video from the DVI and DP ports
|
Core |
|
Note |
-
** Motherboard supports this maximum TDP. Please verify your system can thermally support.
**The X12SCZ does not support the Intel 10th/11th generation processor 2M cache SKUs. These processors will not boot with the latest BIOS version.
|
Memory Capacity |
-
4 DIMM slots
-
Up to 128GB Unbuffered ECC/non-ECC UDIMM, DDR4-2933MHz
|
Memory Type |
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
-
Corrects single-bit errors
-
Detects double-bit errors (using ECC memory)
|
Chipset |
|
SATA |
-
Intel® W480E controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10
|
IPMI |
|
Audio |
-
1x ALC 888S HD Audio port(s)ALC 888S HD Audio
|
Graphics |
-
1 Intel® HD Graphics port(s)
-
1 ASPEED AST2500 BMC port(s)
|
Network Controllers |
-
Single LAN with Intel® PHY I219LM LAN controller
-
Single LAN with Intel® Ethernet Controller I210-AT
-
Dual LAN with Intel® X550 10GBase-T Ethernet Controller
|
SATA |
|
LAN |
-
2 RJ45 Gigabit Ethernet LAN ports
-
2 RJ45 10 Gigabit Ethernet LAN ports
|
USB |
-
6 USB 3.2 Gen2 port(s) (4 rear type A; 2 via header)
-
6 USB 2.0 port(s) (6 via header)
|
Video Output |
-
1 DVI - D port(s), 1 VGA D-Sub Connector port(s), 2 DP++(Dual-Mode DisplayPort) port(s)
|
Serial Port |
|
DOM |
-
1 SATA DOM (Disk on Module) power connector support
|
TPM |
|
|
PCIe |
-
1 PCIe 3.0 x4,
-
1 PCIe 3.0 x16,
-
1 PCIe 3.0 x4 (in x8 slot)
|
M.2 |
-
M.2 Interface: 1 SATA/PCIe 3.0 x4; 1 CNVi/PCIe 3.0 x1
-
Form Factor: 2280/22110, 2230
-
Key: M-Key, E-Key
|
BIOS Type |
|
BIOS Features |
-
ACPI 6.1
-
SMBIOS 3.1
-
PCI FW 3.0
-
UEFI 2.6
-
RTC (Real Time Clock) Wakeup
|
Software |
-
SuperDoctor® 5, SUM, AMT, vPro, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
|
System Management Software |
-
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
|
Power Configurations |
-
ACPI Power Management, ATX Power connector, +12V DC Power Input
|
Voltage |
-
VBAT, PCH temperature, Memory temperature, CPU, Chassis intrusion header, 5 -fan status, 1.2V (VDIMM), 1.05 (PCH), +5V standby, +5V, +3.3V, +12V
|
LED |
-
UID/Remote UID
-
Power LED
-
BMC/IPMI Heartbeat LED
|
Temperature |
-
Thermal Control for 5 Fan Connectors
|
FAN |
-
5x 4-pin fan headers (up to 5 fans)
-
Fan speed control
-
Dual Cooling Zone
-
5 fans with tachometer status monitoring
|
Other Features |
-
UID, RoHS, M.2 NGFF connector, Dual Cooling Zones, Chassis intrusion detection, ATX Power connector, ACPI power management, 8-pin 12v DC power connector, 12V DC or ATX Power Source
|
Operating Temperature Range |
-
0°C - 60°C (32°F - 140°F)
|
Non-Operating Temperature Range |
-
-40°C - 85°C (-40°F - 185°F)
|
Operating Relative Humidity Range |
-
10% - 85% (non-condensing)
|
Non Operating Relative Humidity Range |
-
5% - 95% (non-condensing)
|
|