Product SKUs
SYS-6029BT-HNC0R	SuperServer 6029BT-HNC0R ( Black )
Motherboard
Motherboard	Super X11DPT-B
Processor/Cache
CPU	Dual Socket P (LGA 3647)
	2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s
	Support CPU TDP 70-205W *
Cores	Up to 28 Cores
Note	‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
	* Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization.
System Memory
Memory Capacity	24 DIMM slots
	Up to 6TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM
	Supports Intel® Optane™ DCPMM ††
Memory Type	2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note	† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.
On-Board Devices
Chipset	Intel® C621 chipset
SAS	SAS3 (12Gbps) via Broadcom 3008; IT mode
Network	Must bundle with at least one SIOM network card
IPMI	Support for Intelligent Platform Management Interface v.2.0
	IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video	ASPEED AST2500 BMC
Input / Output (per Node)
LAN	1 RJ45 Dedicated IPMI LAN port
USB	2 USB 3.0 ports (rear)
Video	1 VGA port
DOM	1 Super DOM (Disk on Module) port
Others	M.2 and SATA DOM for boot drive only
System BIOS
BIOS Type	AMI 32Mb SPI Flash ROM
Management
Software	Watch Dog
	KVM with dedicated LAN
	SuperDoctor® 5
	Intel® Node Manager
	IPMI 2.0
	SSM , SPM , SUM
Power Configurations	ACPI / APM Power Management
PC Health Monitoring
CPU	4+1 Phase-switching voltage regulator
	Monitors for CPU Cores, Chipset Voltages, Memory.
FAN	Status monitor for speed control
	Pulse Width Modulated (PWM) fan connectors
	Fans with tachometer monitoring
Temperature	Monitoring for CPU and chassis environment
	Thermal Control for fan connectors
Chassis
Form Factor	2U Rackmount
Model	CSE-827BHQ+-R2K22BP
Dimensions and Weight
Width	17.6" (447mm)
Height	3.47" (88mm)
Depth	30.11" (765mm)
Package	9.76" (H) x 24.65" (W) x 45.28" (D)
Weight	Gross Weight: 86.5 lbs (39.24 kg)
	Net Weight: 56 lbs (25.4 kg)
Available Colors	Black
Front Panel
Buttons	Power On/Off button
	UID button
LEDs	Network activity LEDs
	Power status LED
	HDD activity LED
	Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express	2 PCI-E 3.0 (x16) Low-profile slots
	1 SIOM card support (must bundle with network card)
Drive Bays / Storage (per Node)
Hot-swap	3 Hot-swap 3.5" NVMe/SAS3 drive bays Please contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD.
M.2	2 M.2 NVMe or SATA (2240/2260/2280) via optional AOC-SMG3-2H8M2-B
System Cooling
Fans	4 Heavy duty 8cm PWM fans with air shroud
Power Supply
Power Supply	2200W Redundant Power Supplies with PMBus
Total Output Power	1200W/1800W/1980W/2090/2200W
Dimension (W x H x L)	45 x 40 x 480 mm
Input	1200W: 100-127Vac / 50-60Hz
	1800W: 200-220Vac / 50-60Hz
	1980W: 220-230Vac / 50-60Hz
	2090W: 230-240Vac / 50-60Hz
	2090W: 180-220Vac (for UL/cUL only)
	2200W: 220-240Vac (for UL/cUL only)
	2090W: 230-240Vdc (for CCC only)
+12V	Max: 150A / Min: 0A (200-220Vac)
	Max: 165A / Min: 0A (220-230Vac)
	Max: 100A / Min: 0A (100-127Vac)
	Max: 174.17A / Min: 0A (230-240Vac)
	Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only)
	Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only)
	Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb	Max: 2.1A / Min: 0A
Output Type	Gold Finger
Certification	Titanium Level
Operating Environment
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
	Operating Relative Humidity: 8% to 90% (non-condensing)
	Non-operating Relative Humidity: 5% to 95% (non-condensing)
	Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)