Product SKUs
SYS-1029U-TN12RV	SuperServer 1029U-TN12RV ( Black )
Motherboard
Motherboard	Super X11DPU-V
Processor/Cache
CPU	Dual Socket P (LGA 3647)
	2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s
	Support CPU TDP 70-205W
Cores	Up to 28 Cores
Note	‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.
System Memory
Memory Capacity	24 DIMM slots
	Up to 6TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM
	Supports Intel® Optane™ DCPMM ††
Memory Type	2666 ECC DDR4 NVDIMM
	2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note	† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.
On-Board Devices
Chipset	Intel® C621 chipset
SATA	SATA3 (6Gbps)
Network Connectivity	Networking options provided via Ultra Riser card
IPMI	Support for Intelligent Platform Management Interface v.2.0
	IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics	ASPEED AST2500 BMC
Input / Output
NVMe	6 NVMe/SATA ports (NVMe from CPU 1)
	6 NVMe/SATA ports (NVMe from CPU 2)
LAN	1 RJ45 Dedicated IPMI LAN port
	Networking options provided via Ultra Riser card
USB	2 USB 3.0 ports (rear)
	1 USB 3.0 (front)
Video	1 VGA port
Serial Port	1 Serial header
DOM	2 Super DOM (Disk on Module) ports
System BIOS
BIOS Type	AMI 32Mb SPI Flash ROM
Management
Software	NMI
	KVM with dedicated LAN
	Redfish API
	SuperDoctor® 5
	Intel® Node Manager
	IPMI 2.0
	SSM , SPM , SUM
Power Configurations	ACPI Power Management
PC Health Monitoring
CPU	4+1 Phase-switching voltage regulator
	Monitors for CPU Cores, Chipset Voltages, Memory.
FAN	Status monitor for speed control
	Pulse Width Modulated (PWM) fan connectors
	Fans with tachometer monitoring
Temperature	Monitoring for CPU and chassis environment
	Thermal Control for fan connectors
Chassis
Form Factor	1U Rackmount
Model	CSE-119UHTS-R1K22HP-T
Dimensions and Weight
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	29.1" (739mm)
Gross Weight	48 lbs (21.8 kg)
Available Color	Black
Front Panel
Buttons	Power On/Off button
	System UID button
LEDs	Power LED
	Network activity LEDs
	Hard drive activity LED
	UID LED
Expansion Slots
PCI-Express	1 PCI-E 3.0 x16 (FH, 10.5"L)
	1 PCI-E 3.0 x8 (LP)
	1 Internal PCI-E 3.0
Drive Bays / Storage
Hot-swap	12 Hot-swap 2.5" NVMe/SATA drive bays
	Optional SAS support via SAS storage controller
M.2	2 M.2 PCI-E 3.0 x4 M-Key NVMe via optional add-on card AOC-SLG3-2M2 (2260/2280/22110)
System Cooling
Fans	8 Heavy duty fans with optimal fan speed control
Air Shroud	1 Air Shroud
Power Supply
Power Supply	1200W Redundant Hot-swap Power Supplies with PMBus
Total Output Power	800W: 100 – 127Vac
	1200W: 200 – 240Vac
	1200W: 200 -240Vdc (for CCC only)
Dimension (W x H x L)	73.5 x 40 x 203 mm
Input	100-127Vac / 9.8 - 7A / 50-60Hz
	200-240Vac / 7.5 - 6A / 50-60Hz
	200-240Vdc / 7.5 - 6A (for CCC only)
+12V	Max: 66.7A / Min: 0A (100-127Vac)
	Max: 100A / Min: 0A (200-240Vac)
	Max: 100A / Min: 0A (200-240Vdc)
+12Vsb	Max: 2.1A / Min: 0A
Output Type	25 Pairs Gold Finger Connector
Certification	Titanium Level
Operating Environment
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
	Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
	Operating Relative Humidity: 8% to 90% (non-condensing)
	Non-operating Relative Humidity: 5% to 95% (non-condensing)