Main Specifications
Device Type Motherboard
Dimensions (WxDxH) 12" x 13.05" (30.5cm x 33.1cm)
Form Factor E-ATX
Processor
Compatible Processors Dual AMD EPYC 7000-series Processors
Processor Sockets Socket SP3
System Memory
DIMM Sizes 8GB, 16GB, 32GB, 64GB, 128GB
Error Detection Corrects single-bit errors
  Detects double-bit errors (using ECC memory)
Memory Capacity 16 DIMM sockets
  Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
  8-channel memory bus
  For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
Memory Voltage 1.2V
On-Board Devices
Chipset System on Chip
IPMI Support for Intelligent Platform Management Interface v.2.0
  IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  ASPEED AST2500 BMC
Network Controllers 2 1GbE LAN via Intel® i350-AM21
  1 Realtek RTL8211E PHY (dedicated IPMI)
SATA SATA3 (6 Gbps)
VGA ASPEED AST2500 BMC
Input / Output
LAN 2 RJ45 Gigabit Ethernet LAN ports
  1 RJ45 Dedicated IPMI LAN port
Others 1 COM port (rear)
  2 SATA DOM power connector
  1 TPM 2.0 header
SATA 10 SATA3 (6 Gbps) ports
USB 2 USB 3.0 ports (rear)
  4 USB 2.0 ports (2 rear + 2 via header)
VGA 1 VGA port
Chassis Optimized for
Tower / 4U Rackmount CSE-745BAC-R1K28B2
Expansion / Connectivity
Expansion Slots Total (Free) PCI-Express: 3 PCI-E 3.0 x8
  PCI-Express: 2 PCI-E 3.0 x16
  M.2: Interface: PCI-E 3.0 x2
  M.2: Form factor: 22110
  M.2: Support SATA devices
Management
Power Configurations ACPI Power Management
  Power-on mode control for AC power loss recovery
Software Super Doctor 5, Watch Dog, NMI, SPM, SUM, IPMI 2.0, KVM with dedicated LAN
PC Health Monitoring
CPU Monitors CPU Core Voltages, +1.5V, +1.8V, +12V +5V, +5V standby
  CPU switching voltage regulator
  Supports system management utility
  VBAT
FAN Up to 8-fan status tachometer monitoring
  Up to eight 4-pin fan headers
  Dual Cooling Zone
  Status monitor for speed control
  Pulse Width Modulated (PWM) fan connectors
LED CPU / System Overheat LED
Other Features Chassis Intrusion Detection
  Chassis Intrusion Header
  UID
Temperature Monitoring for CPU and chassis environment
  CPU Thermal Trip Support
  Thermal control for 8x Fan connectors
  I2C Temperature Sensing Logic
System BIOS
BIOS Features Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1
BIOS Type AMI 128Mb SPI Flash EEPROM
Operating Environment
Operating Temperature Operating Temperature:10°C to 35°C (50°F to 95°F)
  Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)
  Operating Relative Humidity:8% to 90% (non-condensing)
  Non-operating Relative Humidity:5% to 95% (non-condensing)
Parts List
Motherboard 1x MBD-H11DSI-O
Cables 2x CBL-0044L, 2x CBL-0097L-03
I/O Shield 1x MCP-260-00042-0N