|
|
|
|
|
SYS-1028U-E1CRTP+ |
-
SuperServer 1028U-E1CRTP+ (Black)
|
|
|
CPU |
-
Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) *
-
Dual Socket R3 (LGA 2011)
|
Cores / Cache |
-
Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
|
Memory Capacity |
-
24x 288-pin DDR4 DIMM slots
-
Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM
|
Memory Type |
-
2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
-
RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
-
LRDIMM: 64GB, 32GB
-
3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
-
Corrects single-bit errors
|
|
|
Chipset |
|
SATA |
-
SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
-
Support for Intelligent Platform Management Interface v.2.0
-
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
-
ASPEED AST2400 BMC
|
Network Connectivity |
-
2x GbE and 2x SFP+ ports via AOC-URN2-I4GXS
-
Intel® i350 Gigabit Ethernet Controller
-
Intel® X710 10G SFP+
-
1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
|
|
SAS |
-
10x SAS3 ports support via expander and storage Add-on Cards
-
One of the following storage Add-on cards required:
AOC-S3108L-H8iR-16DD (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3 16 HDD)
AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)
AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)
AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
|
LAN |
-
2x RJ45 GbE LAN ports
-
2x 10G SFP+ ports
-
1x RJ45 Dedicated IPMI LAN port
|
USB |
-
5x USB 3.0 ports
(2 rear, 2 front, 1 Type A)
|
Video |
|
Serial Port |
|
|
|
BIOS Type |
-
128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
-
Plug and Play (PnP)
-
APM 1.2
-
PCI 2.3
-
ACPI 1.0 / 2.0 / 3.0 / 4.0
-
USB Keyboard support
-
SMBIOS 2.7.1
-
UEFI 2.3.1
|
|
|
Software |
|
Power Configurations |
-
ACPI Power Management
-
Power-on mode for AC power recovery
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Weight |
-
Net Weight: 26 lbs (11.8 kg)
-
Gross Weight: 41 lbs (18.6 kg)
|
Available Color |
|
|
|
Buttons |
-
Power On/Off button
-
System Reset button
|
LEDs |
-
Power LED
-
Hard drive activity LED
-
2x Network activity LEDs
-
System Overheat LED / Fan fail LED /
UID LED
|
|
|
PCI-Express |
-
2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
-
2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and for details.)
|
|
|
Hot-swap |
-
10x 2.5" Hot-swap drives supported via expander
|
|
|
|
Fans |
-
6x heavy duty fans with optimal fan speed control
-
2x additional fans optional
|
Air Shroud |
|
|
|
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
AC Input |
-
100-127Vac, 50-60Hz
-
200-240Vac, 50-60Hz
|
+12V |
-
Max: 62.5A & Min: 0A (100Vac-127Vac)
-
Max: 62.5A & Min: 0A (200Vac-240Vac)
|
12V SB |
|
Certification |
Platinum Level
[ Test Report ] |
|
|
Voltage |
-
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
-
5+1 Phase-switching voltage regulator
|
FAN |
-
8x 4-pin fan headers
-
Status monitor for speed control
-
Pulse Width Modulated (PWM) fan connectors
|
Temperature |
-
Support to monitor Supermicro AOC temperatures from IPMI or SD 5
-
Monitoring for CPU and chassis environment
-
CPU thermal trip support
-
Thermal Control for 8x Fan Connectors
-
Thermal Monitor 2 (TM2) support
-
PECI
|
LED |
-
Memory DIMM ECC error LEDs
-
CPU / System Overheat LED
-
Suspend static indicator LED
-
UID/Remote UID
|
Other Features |
-
4x 8-pin GPU power connectors
-
Chassis intrusion detection
-
Chassis intrusion header
-
SDDC Support
-
RoHS
|
|
|
RoHS |
|
Environmental Spec. |
-
Operating Temperature:
10°C to 35°C (50°F to 95°F)
-
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
-
Operating Relative Humidity:
8% to 90% (non-condensing)
-
Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X10DRU-i+
CSE-119UTS-R751P-T |
1
1 |
Super X10DRU-i+ Motherboard
CSE-119UTS-R751P-T Chassis |
Add-on Card / Module |
AOC-URN2-I4GXS-P |
1 |
AOC-URN2-I4GXS |
Air Shroud |
MCP-310-81906-0N |
2 |
|
Backplane |
BPN-SAS3-116EL1 |
1 |
10-port 1U SAS3 12Gbps single-expander backplane, support up to 10x 2.5-inch SAS3/SATA3 HDD/SSD |
Cable 1 |
CBL-PWEX-0650 |
1 |
8 pin female to 2x RA(Right Angle) big 4 pin female power, 47/62CM, 18AWG,RoHS/REACH |
Cable 2 |
CBL-SAST-0532 |
2 |
Internal Mini-SAS HD to Mini-SAS HD 50cm,30AWG,12Gb/s,HF,RoHS/REACH,PBF |
Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
Manual |
MNL-1678-QRG |
1 |
SYS-1028U-TR(4/4T/T/TP)+, QRG,HF,RoHS/REACH |
Riser Card |
RSC-R1UW-2E16 |
1 |
RSC-R1UW-2E16-O-P |
Riser Card |
RSC-R1UW-E8R |
1 |
RSC-R1UW-E8R-O-P |
Rear Window |
MCP-240-81911-0N |
1 |
Rear window for SC819U, 119U tool-less chassis (i4GXS) |
Heatsink / Retention |
SNK-P0057PS |
2 |
1U High Performance Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB |
Power Supply |
PWS-751P-1R |
2 |
1U 750W Redundant Platinum Single Output Power Supply w/Pmbus W73.5xH40xL203mm,RoHS/REACH |
Mounting Rails |
MCP-290-00102-0N
MCP-290-00120-0N
MCP-290-00112-0N |
1
1
1 |
Outer rail, quick-release type, 25.6" to 33.05"
Inner rail, front, quick-release type (thumb screw applied)
Inner rail, extension, long (quick) for 1U 17.2"W chassis |
Fan |
FAN-0101L4 |
6 |
40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808 |
|
|
|
|
|
|
|
Part Number |
Qty |
Description |
Mounting Rails |
MCP-290-00062-0N
MCP-290-00064-0N
MCP-290-00052-0N-BULK |
-
-
- |
Inner/outer rail set, quick-release type, 25.6" to 33.05"
Thumb screw adapter of inner rail for 1U 17.2"
Bulk outer rail, quick-release type, 25.6" to 33.05" (10 sets/pack) |
Storage Control Card and Cable(s) |
AOC-S3008L-L8e
AOC-S3008L-L8i
AOC-S3108L-H8iR
AOC-S3108L-H8iR-16DD |
-
-
-
- |
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 122HDD, HBA
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 16HDD, RAID 0, 1, 5, 6, 10, 50, 60 |
Network Card(s) |
AOC-S40G-i2Q
AOC-SGP-i2
AOC-SGP-i4
AOC-STG-b4S
AOC-STGN-i2S
AOC-STGN-i1S
AOC-STG-i2T
AOC-STG-i2 |
-
-
-
-
-
-
-
- |
Standard LP 2-port 40GbE controller, based on Intel Fortville XL710
Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350AM2
Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350
Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES
Standard LP, 1x 10GbE SFP+, PCI-E x8, Intel 82599EN
Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540
Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB |
CachVault(s) |
BTR-CV3108-1U1
BTR-TFM8G-LSICVM02 & BKT-BBU-BRACKET-05
BTR-TFM8G-LSICVM02 & MCP-240-00127-0N |
-
-
-
|
CacheVault for LSI 3108 with Supercap mounting in 1U 40x56 fan tray
CacheVault for LSI 3108; Supercap mounting bracket for PCI-E location
CacheVault for LSI 3108; Supercap mounting bracket for 2.5" HDD location |
Software |
SFT-OOB-LIC |
1 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
|
|
|