2028R-C1RT4+



Integrated Board
X10DRC-T4+
Key Features
 
1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    v4†/ v3 family; QPI up to 9.6GT/s
 
2. Up to 3TB† ECC 3DS LRDIMM , up to
    DDR4- 2400†MHz ; 24x DIMM slots
 
3. 2x PCI-E 3.0 x16, 3x PCI-E 3.0 x8, and
    1x PCI-E 2.0 x4 (in x8) slot
 
4. 8x 2.5" SAS3 and 8x 2.5" SATA3
    Hot-swap Drive Bays
 
5. Quad 10GBase-T ports w/ Intel X540
 
6. I/O ports: 2x SuperDOM, 1x VGA, 2x
    COM, 2x USB 3.0 (rear), 4x USB 2.0
    (2 rear, 2 front), 1x Type A
 
7. 3x 8cm high-performance PWM fans
 
8. 920W Redundant Power Supplies
    Platinum Level (94%)
 
Available Colors: Black    

   

Product SKUs
SYS-2028R-C1RT4+
  • SuperServer 2028R-C1RT4+ (Black)
 
Motherboard

Super X10DRC-T4+
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores† / Up to 55MB† Cache
System Bus
  • QPI up to 9.6 GT/s
Note † BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 
System Memory
Memory Capacity
  • 24x 288-pin DDR4 DIMM slots
  • Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type
  • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
SAS
  • LSI 3108 SAS3 (12Gbps) controller;
    HW RAID 0, 1, 5, 6, 10, 50, 60
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ASPEED AST2400 BMC
 
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports
SAS
  • 8x SAS3 (12Gbps) ports
  • SuperCap option support
LAN
  • 4x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports (rear)
  • 4x USB 2.0 ports (2 rear, 2 front)
  • 1x Type A
Video
  • 1x VGA Connector
Serial Port / Header
  • 2x Fast UART 16550 serial
  • 2x COM Ports (1 rear, 1 front)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with UEFI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.3
  • UEFI
  • RTC (Real Time Clock) Wakeup
Chassis
Form Factor
  • 2U Rackmount
Model
 
Dimensions and Weight
Height
  • 3.5" (89mm)
Width
  • 17.2" (437mm)
Depth
  • 24.8" (630mm)
Package
  • 10.5" (H) x 26.5" (W) x 38" (D)
Weight
  • Net Weight: 38.5 lbs (17.5 kg)
  • Gross Weight: 63.5 lbs (28.8 kg)
Available Color
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
 
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x16
  • 3x PCI-E 3.0 x8
  • 1x PCI-E 2.0 x4 (in x8)
 
Drive Bays
Hot-swap
  • 8x 2.5" and 8x 2.5" Hot-swap drive bays
 
System Cooling
Fans
  • 3x 8cm heavy duty fans with optimal fan speed control
 
Power Supply with Power Distributor
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input
  • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
  •   4 Amp @ +5V standby
  •   75 Amp @ +12V
Certification Platinum Level Certified94%+    Platinum Certified
  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
FAN
  • Total of five 4-pin PWM fans
  • 5x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 10x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED
Other Features
  • SDDC Support
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List - (Items Included)
 
 Part Number
 Qty
 Description
Motherboard / Chassis MBD-X10DRC-T4+
 
CSE-213AC-R920LPB		 1
 
1		 Super X10DRC-T4+ Motherboard
 
2U Black SC218G Chassis
Backplane BPN-SAS3-213A 1 16-port 2U SAS3 12Gbps direct-attached backplane, support up to 16x 2.5-inch SAS3/SATA3 HDD/SSD
Cable 1 CBL-SAST-0631 2 cross-over mini SAS HD to 4 SATA w/SB, S. 55cm. 30AWG,RoHS/REACH
Cable 2 CBL-SAST-0614 2 RA to S mini SAS HD 12Gb/s, 40cm, 30AWG,HF,RoHS/REACH,PBF
Cable 3 CBL-SAST-0568 2 Internal Mini-SAS HD to Mini-SAS HD 35cm,30AWG,12Gb/s,HF,RoHS/REACH,PBF
Cable 4 CBL-SAST-0591 2 cross-over mini SAS HD to 4 SATA w/SB, S. 75cm. 30AWG,HF,RoHS/REACH,PBF
Label LBL-0108 1 CAUTION LABEL FOR REDUNDANT PWR SYSTEMS
Manual MNL-1595-QRG 1 SYS-2028R-C1RT4+/SYS-2028R-C1R4+, QRG,HF,RoHS/REACH,PBF
Parts MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.
Heatsink / Retention SNK-P0048P 2 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Square ILM MB
Drive Tray(s) MCP-220-00007-01 1 Black USB/COM port tray for SC825, 836
Power Supply PWS-920P-1R 2 1U REDUNDANT 920W PMBus 94% EFFICIENCY

 
Optional Parts List
  Part Number Qty Description
       
Software SFT-OOB-LIC 1 OOB Management Package (per node license)
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)