6018TR-T



Integrated Board
Super X10DRT-L
Key Features
Two systems (nodes) in a 1U form factor. Each node supports the following: 1. Dual socket R3 (LGA 2011) supports
    Intel® Xeon® processor E5-2600 v3
    family; QPI up to 9.6GT/s
2. Up to 512GB ECC DDR4 2133MHz;
    8x DIMM slots
3. 1x PCI-E 3.0 x16 (in x16) slot
4. 2x 3.5" Hot-swap SAS/SATA drive bays 5. Intel® i350 Dual port GbE LAN
6. I/O ports: 2x SuperDOM, 1x VGA,
    1x COM, 2x USB 2.0 (rear)
7. 1000W High-efficiency Power Supply
    Titanium Level Certified
Available Colors: Black    

 

Product SKUs
SYS-6018TR-T
  • SuperServer 6018TR-T (Black)
 
Motherboard

Super X10DRT-L
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 
System Memory
Memory Capacity
  • 8x 288-pin DDR4 DIMM slots
  • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Supports 10GBASE-T, 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Video
  • ASPEED AST2400 BMC
 
Input / Output
Serial ATA
  • 10x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 2.0 ports (rear)
Video
  • 1x VGA port
Serial Port / Header
  • 1x COM port (1 header)
DOM
  • 2x SuperDOM (Disk on Module) ports
 
Management
Software
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 1U Twin
Model
  • CSE-808TS-1K03B
 
Dimensions and Weight
Width
  • 17.2" (437mm)
Height
  • 1.75" (44.45mm)
Depth
  • 27.75" (705mm)
Gross Weight
  • 43 lbs (19.5kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • Universal Information (UID) LED
 
Expansion Slots (per node)
PCI-Express
  • 1x PCI-E 3.0 x16 (in x16) slot
 
Drive Bays (per node)
Hot-swap
  • 2x 3.5" Hot-swap drive bays
 
Backplane
SAS/SATA HDD Backplane
 
System Cooling (per node)
Fans
  • 3x 40x56mm counter-rotation PWM fans
 
Power Supply
1000W Titanium Level (96%) High-efficiency AC-DC power supply with PMBus and I2C
AC Input
  • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
  •   4 Amp @ +5V standby
  •   75 Amp @ +12V
Certification Titanium Level Certified96%    Titanium Level Certified
  [ Test Report ]
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.3
  • ACPI 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)